expo/expoweb
1
0
Fork 0
mirror of https://expo.survex.com/repositories/expoweb/.git/ synced 2025-12-08 14:54:28 +00:00
Code Issues Packages Projects Releases Wiki Activity

Hut network handbook page formatting

Browse Source
This commit is contained in:
addledo
2025-07-06 20:25:04 +01:00
parent 87bde65803
commit d2312a5fa4
1 changed files with 1 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
handbook/computing/netconfig.html
View File

@@ -17,7 +17,7 @@
<p>The Wavlink antenna sits on the outside of the potato hut and picks up the Gasthof WiFi. This is wired via ethernet cable and PoE (Power over Ethernet adapter) to the Netgear router, which acts as a switch and wireless access point. DHCP is done by the antenna. The antenna should be wired to one of the black LAN ports on the router, not the yellow WAN port. The Wavlink antenna is set up in "Repeater" & "WISP" mode. This is the only device seen by the Gasthof WiFi as it performs NAT for devices connected to its network. A device must manually login to the Gasthof network every so often, which autheticates for all devices on our network. In the past there has been an automated login script, but this is currently broken.
<h3>Running cables outside<h3>
<h3>Running cables outside</h3>
<p>The ethernet cable to the outisde is run into the ceiling vent above the kitchen and then out of the wall vent above the sink outside the tatty hut. The antenna is mounted to a screw on the wall near there. In 2025 the download speed achieved from this setup was 50-60Mbps. The cable was crimped after running through in 2025, and may be more difficult to run with the connector head attached if it is removed in the future.
<h3>USB Hub</h3>