2004-04-22 21:43:17 +01:00
|
|
|
<html>
|
2001-08-15 19:29:27 +01:00
|
|
|
<head>
|
2004-04-22 21:43:17 +01:00
|
|
|
<title>CUCC Expo Surveying Handbook: Surface surveys</title>
|
2004-04-21 10:35:34 +01:00
|
|
|
<link rel="stylesheet" type="text/css" href="../../css/main2.css" />
|
2001-08-15 19:29:27 +01:00
|
|
|
</head>
|
|
|
|
|
<body>
|
|
|
|
|
|
2004-04-24 12:50:58 +01:00
|
|
|
<h2 id="tophead">CUCC Expo Surveying Handbook</h2>
|
2004-04-22 21:43:17 +01:00
|
|
|
<h1>Surface surveys</h1>
|
2001-08-15 19:29:27 +01:00
|
|
|
|
|
|
|
|
|
2018-08-09 10:31:45 +01:00
|
|
|
|
|
|
|
|
<h3>Surface surveying is different</h3>
|
2004-04-23 08:58:27 +01:00
|
|
|
<p>
|
|
|
|
|
<a href="../../piclinks/ssvypl.htm"><img src="../../tinypix/ssvypl.jpg"
|
|
|
|
|
width="122" height="122" alt="" class="onleft" /></a>
|
|
|
|
|
The main difference with a surface survey is that you can see, and are not
|
2001-08-15 19:29:27 +01:00
|
|
|
constrained by passage walls. The lack of walls may mean that all survey
|
|
|
|
|
points are on the floor, which can be a pain. It is useful to use one or two
|
|
|
|
|
"survey staffs", which may be as simple as a stick shoved in a grike, or a
|
|
|
|
|
photographic tripod which is handy. Make sure not to place a compass too near
|
2004-04-23 08:58:27 +01:00
|
|
|
anything made of steel! An aluminium pole (old tent pole, ski stick or any
|
2001-08-15 19:29:27 +01:00
|
|
|
odd bit of tube or angle) is light and effective. Making it a useful length
|
|
|
|
|
(eg. 1m or 1.5m) means it can double as a ruler for measuring features.
|
2018-08-09 10:31:45 +01:00
|
|
|
<p>
|
2001-08-15 19:29:27 +01:00
|
|
|
Surface survey legs tend to be longer than underground ones, so errors from
|
2018-08-09 10:31:45 +01:00
|
|
|
poor compass/clino/distoX angle readings are bigger. In good light you may find it easier
|
2001-08-15 19:29:27 +01:00
|
|
|
or get more consistent results by sighting the compass with <b>one</b> eye
|
|
|
|
|
rather than two. Remember to do this consistently, and use the same method
|
|
|
|
|
when doing your calibration. For better accuracy, you should really keep the
|
|
|
|
|
survey legs short (6m gives a compass/clino error comparable with a 5cm
|
2001-08-15 20:02:01 +01:00
|
|
|
station position error). This makes the survey take much longer, and maybe
|
2001-08-15 19:29:27 +01:00
|
|
|
more prone to recording errors, so a good compromise is to keep legs down to
|
2004-04-22 21:43:17 +01:00
|
|
|
15m or less, which also makes sketching a little easier.</p>
|
2018-08-09 10:31:45 +01:00
|
|
|
<p>Using a distoX above ground does make it hard to see the laser spot in bright
|
|
|
|
|
sunlight of course, which limits the length of legs (except at dusk).
|
2001-08-15 19:29:27 +01:00
|
|
|
|
2004-04-22 21:43:17 +01:00
|
|
|
<p><b>Don't neglect sketching!</b> Cold, exhaustion and call-out times should
|
|
|
|
|
not be such a restriction on surface surveys, so don't do a rush job (it is
|
|
|
|
|
best <b>not</b> to do surface surveys when the weather is awful:-). A good
|
|
|
|
|
surface sketch makes caves easier to find, possibly saving future cavers from
|
|
|
|
|
repeating your bearings to find the entrance. Eventually such sketches will
|
2018-08-09 10:31:45 +01:00
|
|
|
build to a map of the area, showing which bits have really been looked at.
|
|
|
|
|
<p>It
|
2004-04-22 21:43:17 +01:00
|
|
|
is conventional to survey to the cave marker tag, where there is one (and you
|
|
|
|
|
could always drill a spit for one, and survey to it). Failing that, the centre
|
|
|
|
|
of the painted number or middle of the "+" sign, or the first bolt of the
|
|
|
|
|
rigging (remember that we are no longer allowed to paint marks on the plateau
|
|
|
|
|
surface). Make sure that you record what is used, and its height above/below
|
|
|
|
|
the "surface".</p>
|
2001-08-15 19:29:27 +01:00
|
|
|
|
|
|
|
|
<p>If you do run out of time, make sure that your final survey point can
|
|
|
|
|
readily be found again, for example a drilled hole in a prominent boulder
|
|
|
|
|
(take a photo). Consider going back a few legs if it will give you an
|
|
|
|
|
easier to find end point - better to lose one or two legs than have to redo
|
2004-04-22 21:43:17 +01:00
|
|
|
the whole survey!</p>
|
2001-08-15 19:29:27 +01:00
|
|
|
|
2018-08-09 10:31:45 +01:00
|
|
|
<h3>Entrances and holes</h3>
|
|
|
|
|
<p>All features of speleological interest should have their position recorded exactly.
|
|
|
|
|
These days (2018) a long-average (200+ readings) GPS location is fine (see <a href="gps.htm">GPS for entrances</a>) in most parts of our caving area.
|
|
|
|
|
This usually means using a handheld GPS device rather than a phone unless you have a particularly
|
|
|
|
|
good GPS app which provides an averaging function.
|
|
|
|
|
|
|
|
|
|
<p>If you are close to a big cliff, or almost inside an overhang, then an averaged-GPS will be good (~ 2m accuracy)
|
|
|
|
|
for latitude/longitude but appallingly misleading for altitude. In some parts of our area, such as the steep cliffs of
|
|
|
|
|
the Weisse Wand near Schnellzughöhle (as seen in <a href="../../piclinks/ssvypl.htm">the photo at the top of this page</a>),
|
|
|
|
|
altitude is important for route-finding so GPS becomes surprisingly much less useful for re-finding locations. Before you use
|
|
|
|
|
GPS you really should read <a href="gps.htm">GPS for entrances</a>.
|
|
|
|
|
There is more about GPS altitudes in <a href="coord.htm">Olaf's article on GPS in Austria</a>.
|
|
|
|
|
|
|
|
|
|
<p>Without GPS we need an old-fashioned survey location using fixed points
|
|
|
|
|
with a minimum
|
|
|
|
|
of two bearings on fixed landmarks (see <a href="../findit.htm">taking bearings
|
|
|
|
|
</a> page for how to do this and for pictures of the various peaks we use).
|
|
|
|
|
<p>Anything
|
|
|
|
|
which gets a number (e.g. 2018-ad-01) should eventually be linked into an existing surface
|
|
|
|
|
survey. The number (on a metal tag) will be attached to the cave
|
|
|
|
|
entrance with a bolt, so it is useful to drill a hole for this (and place the
|
|
|
|
|
spit if possible) early on, so you can use that point as the start of the
|
|
|
|
|
underground or surface surveys. Always fix new stuff with a
|
|
|
|
|
GPS (use waypoint averaging) as even if this is not full survey-quality it does prevent things getting lost.
|
|
|
|
|
There is a separate manual page for <a href="gps.htm">using GPS for entrances</a>.</p>
|
|
|
|
|
|
2001-08-15 19:29:27 +01:00
|
|
|
<h3>Finding a starting point</h3>
|
|
|
|
|
|
|
|
|
|
<p>If your new cave is near a well-documented one, then a short connecting
|
|
|
|
|
survey from one to the other is straightforward. The point on the cave
|
|
|
|
|
should always be accessible without caving gear. Usually this will be the
|
|
|
|
|
cave marker tag (or the spit you have placed for one, or hole drilled for
|
|
|
|
|
it). If there is just a hole, it is as well to mark it with a bit of paint
|
|
|
|
|
so it can be found again. Failing these, a well-documented spot which can
|
|
|
|
|
be found again is essential - the first bolt of the rigging or part of a
|
2004-04-22 21:43:17 +01:00
|
|
|
painted number.</p>
|
2001-08-15 19:29:27 +01:00
|
|
|
|
|
|
|
|
<p>The surface is now becoming laced with a network of surface surveys of
|
|
|
|
|
different vintages and qualities. As these build up, good sketching means
|
|
|
|
|
a useful scale map can be drawn, which in turn means you can look to see
|
|
|
|
|
where the nearest existing fixed points are to your cave. The best fixed
|
|
|
|
|
points are the ones fixed by accurate (laser theodolite) survey by the
|
|
|
|
|
Austrians, commonly known as <a href="lasers.htm">"laser points"</a>. Next
|
2004-04-22 21:43:17 +01:00
|
|
|
best are surface surveys taking a short route from these points.</p>
|
2001-08-15 19:29:27 +01:00
|
|
|
|
2004-04-22 21:43:17 +01:00
|
|
|
<hr />
|
|
|
|
|
<ul id="links">
|
|
|
|
|
<li><b>Expedition Handbook:</b>
|
|
|
|
|
<ul>
|
|
|
|
|
<li>Expo Handbook <a href="../index.htm">Introduction</a></li>
|
|
|
|
|
<li><b>Surveying:</b>
|
|
|
|
|
<ul>
|
|
|
|
|
<li>Surveying <a href="index.htm">Overview</a> and index of
|
|
|
|
|
topics</li>
|
|
|
|
|
<li><a href="what.htm">What is a cave survey?</a></li>
|
|
|
|
|
<li><a href="why.htm">Why am I doing this?</a></li>
|
|
|
|
|
<li>Methods: <a href="how.htm">underground</a></li>
|
|
|
|
|
<li>Pitfalls to avoid, <a href="hints.htm">hints'n'tips</a> to
|
|
|
|
|
make life easier</li>
|
|
|
|
|
<li>Methods: surface</li>
|
2024-04-20 03:49:35 +01:00
|
|
|
<li>A new cave: <a href="gps.htm">Getting a GPS fix</a></li>
|
2004-04-22 21:43:17 +01:00
|
|
|
<li>Base Camp: <a href="getin.htm">getting it in</a> to the
|
|
|
|
|
computer</li>
|
|
|
|
|
<li>Base Camp: <a href="drawup.htm">drawing it up</a>, writing
|
|
|
|
|
the description</li>
|
|
|
|
|
</ul></li>
|
|
|
|
|
<li><a href="../look4.htm">Prospecting guide</a></li>
|
|
|
|
|
<li><a href="../rescue.htm">Rescue guide</a></li>
|
2019-02-27 17:08:22 +00:00
|
|
|
<li><a href="../rig/rigit.html">Rigging guide</a></li>
|
2004-04-22 21:43:17 +01:00
|
|
|
<li><a href="../photo.htm">Photography guide</a></li>
|
|
|
|
|
</ul></li>
|
|
|
|
|
<li><a href="../../infodx.htm">Index to info/topics pages</a></li>
|
|
|
|
|
<li><a href="../../indxal.htm">Full Index to area 1623</a>
|
|
|
|
|
<ul>
|
|
|
|
|
<li><a href="../../areas.htm">Area/subarea descriptions</a></li>
|
|
|
|
|
</ul></li>
|
|
|
|
|
<li><a href="../../index.htm">Back to Expedition Intro page</a></li>
|
|
|
|
|
<li><a href="../../../index.htm">Back to CUCC Home page</a></li>
|
|
|
|
|
</ul>
|
2001-08-15 19:29:27 +01:00
|
|
|
|
|
|
|
|
</body>
|
|
|
|
|
</html>
|
