mirror of
https://expo.survex.com/repositories/expoweb/.git/
synced 2024-11-25 16:52:00 +00:00
296 lines
14 KiB
HTML
296 lines
14 KiB
HTML
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
|
|
<html>
|
|
<head>
|
|
<meta http-equiv="Content-Type" content="text/html; charset=utf8" />
|
|
<title>CUCC Expo Surveying Handbook: Coordinate Systems</title>
|
|
<link rel="stylesheet" type="text/css" href="../../css/main2.css" />
|
|
</head>
|
|
<body>
|
|
|
|
<h2 id="tophead">CUCC Expo Surveying Handbook</h2>
|
|
<h1>Coordinate Systems</h1>
|
|
<p>
|
|
If you are not interested in the theoretical background, just jump down to the
|
|
<a href="#summary">summary</a>.
|
|
</p>
|
|
<p>See also:<br>
|
|
<a href="/eastings">Troggle UTM data report</a><br>
|
|
<a href="lasers.htm">Geographical fixed points on Loser</a><br>
|
|
<a href="coord2.html">GPS and coordinate systems</a><br>
|
|
<a href="/katast.htm">The Austrian Kataster areas</a>.
|
|
|
|
|
|
<p>
|
|
When dealing with geographical data like cave locations, you will
|
|
inevitably run into a whole zoo of coordinate systems with names like
|
|
WGS84, UTM, BMN and so on. While a thorough introduction is probably
|
|
more appropriate for a full course in geodesy, I'll try to summarise the most
|
|
important bits as far as they are relevant to us and as far as I understand
|
|
them myself.
|
|
</p>
|
|
|
|
<h2>Projections</h2>
|
|
|
|
<p>
|
|
In a first approximation the earth is a sphere. And unfortunately there are
|
|
some mathematical proofs showing that it's not possible to project the surface
|
|
of a sphere onto a 2D plane or map without distortions. People have still tried
|
|
hard and come up with a particular projection called the Transversal Mercator
|
|
projection, which has beneficial properties summarised as "locally there are
|
|
almost no distortions".
|
|
</p>
|
|
|
|
<p>
|
|
The non-transversal, standard Mercator projection essentially takes a cylinder
|
|
aligned with the rotational axis of the earth from north to south and wraps the
|
|
cylinder around the equator of the earth. Next all the important
|
|
landmarks are projected onto the cylinder by casting rays from the centre of
|
|
the earth through its surface and onto the cylinder. Once everything is mapped,
|
|
the cylinder is cut open and unwrapped onto a flat table and ready is your map.
|
|
This map will be very accurate and have very little distortions around the
|
|
equator, but the closer you get to the poles the more distortions will become
|
|
noticeable. In particular think of where the north and south poles will be
|
|
projected to.
|
|
</p>
|
|
|
|
<p>
|
|
The Transversal Mercator projection is very similar to the above, but instead
|
|
of aligning the cylinder with a north-south axis and intersecting earth along
|
|
the equator, it is tilted sideways, aligned with an east-west axis and
|
|
intersects earth in a circle for example along the 0-meridian through
|
|
Greenwich, through the poles, and somewhere through the Pacific. The rest is
|
|
done as before and once you cut the cylinder open and unwrap it, you'll get an
|
|
accurate map with little distortions exactly around the line of intersection,
|
|
which is called the "central meridian" of this particular Transversal Mercator
|
|
projection. Of course America and China would be heavily distorted with the
|
|
above choice of central meridian. So instead of doing just one of these
|
|
Transversal Mercator projections globally, the earth is divided into e.g.
|
|
60 zones and a different cylinder with a different central meridian is selected
|
|
for each zone. One particular definition of such zones has been internationally
|
|
standardised as Universal Transversal Mercator coordinates, but for the
|
|
entertainment of the local geodesists, different local coordinate systems and
|
|
"zones" have been defined for many countries. In Germany this is called
|
|
"Gauss-Krüger (GK)", in Austria there is a definition called
|
|
"Bundesmeldenetz (BMN)", and in the UK it is the "British National Grid (BNG)".
|
|
</p>
|
|
|
|
<p>
|
|
One more thing. Once you have your unwrapped cylinder you'll
|
|
have to define coordinates on this cylinder surface, your map. These are
|
|
usually metric coordinates, i.e. they specify how many metres you have to walk
|
|
north and east on the cylinder surface starting from a given origin. And
|
|
typically one starts the "easting" at for example the western boundary of a
|
|
zone and the "northing" at the equator. For a national Austrian grid, it
|
|
doesn't make sense to start at the equator and therefore some
|
|
"false easting" and "false northing" have been defined by omitting some
|
|
of the leading digits. This saves repeatedly typing all the
|
|
same prefixes over and over again.
|
|
</p>
|
|
|
|
<h2>Ellipsoids</h2>
|
|
|
|
<p>
|
|
Unfortunately the earth is not a sphere. A slightly more accurate
|
|
representation would be an ellipsoid, that is wider around the equator and
|
|
flatter at the poles. This has long been known and the Transversal Mercator
|
|
projection has been adapted to an ellipsoidal shape, so that it has even less
|
|
distortions. And of course, many clever people have come up
|
|
with many clever approximations of the ellipsoid. For example, the British
|
|
National Grid uses an ellipsoid defined by someone called Airy in 1830, and
|
|
Bessel has come up with a different ellipsoid in 1841. These were computed
|
|
by making accurate astronomical observations at different places within Europe.
|
|
In contrast, the more modern WGS84 ellipsoid has been defined by satellite
|
|
observations in more recent times.
|
|
</p>
|
|
|
|
<p>
|
|
The different ellipsoids not only vary in their major and minor axes, but
|
|
also the centre of the ellipsoids can be offset or the whole
|
|
ellipsoid can be rotated by a bit. So these offset and rotation parameters have
|
|
to be specified as well, and getting the ellipsoid parameters wrong would
|
|
typically result in coordinates that are around 500m off, which is unacceptable
|
|
for locating a cave entrance on the plateau. So we can't just ignore the
|
|
ellipsoids but have to get their definitions right.
|
|
</p>
|
|
|
|
<h2>Geoids</h2>
|
|
|
|
<p>
|
|
Unfortunately the earth is not an ellipsoid either, but rather something like
|
|
a potato. This is not so important for defining east and north coordinates,
|
|
but it is very important for defining altitudes. While one sensible definition
|
|
of altitudes would simply be the "height above ellipsoid", it actually makes
|
|
quite a bit of sense to rethink this definition and come up with something
|
|
different, called geoids (not to be confused with ellipsoids!).
|
|
</p>
|
|
|
|
<p>
|
|
Traditionally height was defined by "mean sea level", and in Austria they use
|
|
something called "Gebrauchshöhen Adria", which is meant to be the height
|
|
above the Adriatic sea. Unfortunately you can only measure the mean sea level
|
|
along the coast and it becomes a bit more difficult in the mountains. So
|
|
starting from a single point defined as the mean sea level in Trieste in 1875
|
|
or so, the Austrians started to triangulate a grid of survey stations across
|
|
all of their empire. According to this triangulation they ended up with
|
|
several reference heights of certain peaks and so on, which is not necessarily
|
|
the real height above Adria anymore but includes some errors. Still, these
|
|
reference heights make up the "Gebrauchshöhe Adria", which literally means
|
|
something like "Used Height Adria".
|
|
</p>
|
|
|
|
<p>
|
|
As clinos are affected by gravity, so are the Austrian
|
|
triangulations, and it turns out that the mass of the continental
|
|
plates does indeed affect gravity. So if you simply approximate the mean
|
|
sea level by a "simple" ellipsoid such as the "height above ellipsoid" does,
|
|
then you end up with a completely different set of altitudes compared to
|
|
the triangulation results. It turns out that relative to the ellipsoid the
|
|
"mean sea level" at some point in the alps would be about 40m above the mean
|
|
sea level at some point along the coast, just because the heavy continental
|
|
crust would attract more water. The "Gebrauchshöhen
|
|
Adria" have been defined with exactly this mass anomaly, and that's
|
|
what the Austrians use to this date.
|
|
</p>
|
|
|
|
<p>
|
|
Nowadays geodesists have come up with something called geoids. These geoids
|
|
define the shape of equipotential surfaces, i.e. the shape of the surfaces
|
|
along which a reference body would have the same potential energy in the
|
|
gravity field of the earth. So in a sense, the Austrians defined a small
|
|
portion of a geoid by measuring the gravity field and defining their
|
|
"Gebrauchshöhen Adria" accordingly. In the meantime, some other geoids
|
|
have been defined and refined using satellite measurements and so on. There are
|
|
plenty of them available as huge "geoid height above ellipsoid"-tables in some
|
|
massive files (well, 4MB for the old, simple geoid models, 200MB for more
|
|
modern and accurate ones).
|
|
</p>
|
|
|
|
<p>
|
|
Most modern GPS receivers, at least most Garmin ones, will nowadays compute a
|
|
"height above sea level", and not a "height above ellipsoid". Unfortunately
|
|
at least Garmin devices do not allow to change this, and the bad news is that
|
|
in fact no one outside the Garmin Corporation really seems to know, how they
|
|
managed to approximate the geoid in their tiny little units with not very much
|
|
memory and computation power. But the good news is that the
|
|
differences between various geoids are usually in the range of 25cm, and the
|
|
Austrian "Gebrauchshöhen Adria" make no difference there. In fact, as the
|
|
Bessel ellipsoid has been designed within Europe and adapted to the shape of
|
|
the alps, even the differences between the Bessel ellipsoid and the
|
|
"Gebrauchshöhen Adria" are below 3.5m for most parts of Austria and about
|
|
40cm on the Schwarzmooskogel.
|
|
</p>
|
|
|
|
<h2>Converting Coordinates</h2>
|
|
|
|
<p>
|
|
Luckily all of the above is so horribly complicated, that people have long come
|
|
up with computer programs for converting these coordinate systems back
|
|
and forth. You just have to find an appropriate suite of software and learn how
|
|
to use it. And particularly the using part can still be quite complicated. For
|
|
the reasons detailed in the "Geoids" section above, I'd recommend converting
|
|
only the horizontal coordinates and keeping the altitude measurements from the
|
|
GPS.
|
|
</p>
|
|
|
|
<p>
|
|
I personally get along very well with Proj4, which is open source and free and
|
|
all that. It should also be packaged with all major Linux distributions and
|
|
installed on the expo computer. Unfortunately the current versions do not deal
|
|
very well with vertical datums (i.e. geoids), but we can ignore the geoids
|
|
anyway. To invoke it, you have to type in something like
|
|
</p>
|
|
|
|
<div style="background-color: #BDB"><pre>
|
|
cs2cs +from [+some +magic +parameters] \
|
|
+to [+some +more +magic +parameters]
|
|
</pre></div>
|
|
|
|
<p>
|
|
Then you type in the coordinates in the source format and you'll get
|
|
coordinates in the destination system, sometimes with x and y swapped back
|
|
and forth. The following table is intended to help you choose the right magic
|
|
parameters for your coordinate system:
|
|
</p>
|
|
|
|
<div style="background-color: #BDB"><table>
|
|
<tr><td>
|
|
Latitude-Longitude in WGS84 datum with heights above WGS84 ellipsoid:
|
|
<pre> +proj=latlon +ellps=WGS84 +datum=WGS84</pre>
|
|
</td></tr>
|
|
<tr><td>
|
|
Latitude-Longitude in WGS84 datum with heights above EGM96 geoid<sup>[<a name="ftnEGM96" href="#ftn.EGM96">1</a>]</sup>:
|
|
<pre> +proj=latlon +ellps=WGS84 +datum=WGS84 +geoidgrids=egm96_15.gtx</pre>
|
|
</td></tr>
|
|
<tr><td>
|
|
UTM coordinates in WGS84 datum with heights above EGM96 geoid<sup>[<a href="#ftn.EGM96">1</a>]</sup>:
|
|
<pre> +proj=utm +zone=33 +ellps=WGS84 +datum=WGS84 \
|
|
+geoidgrids=egm96_15.gtx</pre>
|
|
</td></tr>
|
|
<tr><td>
|
|
Austrian coordinates for our Loser data set<sup>[<a name="ftnBMN" href="#ftn.BMN">2</a>]</sup>:
|
|
<pre> +proj=tmerc +lat_0=0 +lon_0=13d20 +k=1 +x_0=0 +y_0=-5200000 \
|
|
+ellps=bessel +towgs84=577.326,90.129,463.919,5.137,1.474,5.297,2.4232</pre>
|
|
</td></tr>
|
|
</table>
|
|
</div>
|
|
<div class="footnote">
|
|
<p><sup>[<a name="ftn.EGM96" href="#ftnEGM96">1</a>]</sup>
|
|
Starting from version 4.8, the cs2cs program should have rudimentary support
|
|
for vertical datums. You might have to separately install the file egm96_15.gtx,
|
|
though. While this file strictly speaking only defines the EGM96 geoid, it can
|
|
serve as a good approximation to most other geoids, including the one used by
|
|
Garmin GPS receivers and the "Gebrauchshöhe Adria"
|
|
</p>
|
|
<p><sup>[<a name="ftn.BMN" href="#ftnBMN">2</a>]</sup>
|
|
There are a few different versions of the "+towgs84" part of the Austrian
|
|
coordinate system, which specifies the offset and rotation of the used Bessel
|
|
ellipsoid with respect to the WGS84 ellipsoid. According to an old table found
|
|
on this expo website, it should read "575,93,466,5.1,5.1,5.2,2.5", which is
|
|
clearly a mistyped version of the more commonly found definition
|
|
"575,93,466,5.1,1.6,5.2,2.5". Both of these seem slightly less accurate than
|
|
the "577.326,90.129,463.919,5.137,1.474,5.297,2.4232" proposed by various
|
|
other sources, but in the end it will only make a difference of
|
|
about a metre or so.
|
|
</p>
|
|
</div>
|
|
|
|
<h2><a name="summary">Summary</a></h2>
|
|
|
|
<p>
|
|
[These are Olaf's view in 2012. This is no longer what we use! Today we use WGS84
|
|
latitude and logitude just as it appears on your phone or GPS. (Note added May 2021)]</p>
|
|
For all practical purposes I'd say, set your GPS receiver to UTM coordinates,
|
|
WGS84 ellipsoid, WGS84 datum. It will
|
|
usually spit out rather unspecific "heights above sea level", which are within
|
|
about 25cm of the heights in our data set. To convert the horizontal
|
|
coordinates from UTM zone 33 to our data set coordinates, use:
|
|
</p>
|
|
|
|
<div style="background-color: #BDB"><pre>
|
|
cs2cs +from +proj=utm +zone=33 +ellps=WGS84 +datum=WGS84 \
|
|
+to +proj=tmerc +lat_0=0 +lon_0=13d20 +k=1 \
|
|
+x_0=0 +y_0=-5200000 +ellps=bessel \
|
|
+towgs84=577.326,90.129,463.919,5.137,1.474,5.297,2.4232
|
|
</pre></div>
|
|
|
|
<p>
|
|
As an exercise you can try to convert the following between
|
|
latitude-longitude, UTM and data set coordinates:
|
|
</p>
|
|
|
|
<div style="background-color: #BDB"><table>
|
|
<tr><th>Point</th><th>lat-long WGS84</th><th>UTM WGS84</th><th>data set</th></tr>
|
|
<tr><td>161g</td><td>13d49'35.982"E 47d41'1.807"N </td><td>411941 5281827 </td><td>37095.76 82912.23</td></tr>
|
|
<tr><td>204a</td><td>13.82146667 47.69093333</td><td>411563 5282622</td><td>36700.78 83698.97</td></tr>
|
|
<tr><td>2001-06 </td><td>13.81911639 47.67609556</td><td>411362 5280976</td><td>36534.63 82048.14</td></tr>
|
|
<tr><td>2011-01</td><td>13.82701861 47.69979611</td><td>411995 5283601</td><td>37111.31 84686.99</td></tr>
|
|
</table></div>
|
|
|
|
<p><i>Olaf Kähler, September 2012</i></p>
|
|
<hr />
|
|
<p>Return to <a href="coord2.html">GPS and coordinate systems</a>.
|
|
|
|
</body>
|
|
</html>
|
|
|