mirror of
https://expo.survex.com/repositories/expoweb/.git/
synced 2024-11-22 07:11:55 +00:00
65 lines
8.3 KiB
HTML
65 lines
8.3 KiB
HTML
<!DOCTYPE html>
|
||
<!-- This file is generated by troggle on Nov. 2, 2023, 8:16 p.m. UTC using the form documented at /handbook/survey/caveentry.html -->
|
||
<!-- Only put one cave in this file -->
|
||
<!-- If you edit this 1623-nnn.html file by hand, and manually upload it to the server using git,
|
||
make sure you update the database by doing a full data import. If you edit it using the online form
|
||
though, you do not need to do a data import as it happens automatically -->
|
||
<!-- ALTERNATIVELY you can download an example template from expoweb/templates/cave_data.html -->
|
||
<html lang="en">
|
||
<head>
|
||
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/>
|
||
</head>
|
||
<body>
|
||
<b>This file is generated by troggle</b> on Nov. 2, 2023, 8:16 p.m. UTC using the form documented at
|
||
the form documented at
|
||
<a href="/handbook/survey/caveentry.html">handbook/survey/caveentry.html</a>
|
||
<br>
|
||
|
||
<cave>
|
||
<non_public>False</non_public><!-- 'False' or 'True'. True if the cave should only be visible to logged-in users. Caves are normally public, so enter 'False' unless you know otherwise. -->
|
||
<caveslug>1623-158</caveslug><!--(Required). Internal I.D. used to refer to this cave in entrance data files. Typically the same as the filebase, e.g. '1623-195' -->
|
||
<official_name>Donner und Blitzen Höhle</official_name><!-- Name of the cave (normally in German) Use ü for u+Umlaut and ö for o+umlaut eg Höhle for Hohle and Glück for Gluck-->
|
||
<area>1623</area><!-- e.g. "1623" -->
|
||
<kataster_code>3/S +</kataster_code><!-- 'length-or-depth/type exploration'
|
||
code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast.htm
|
||
|
||
T Trockenhöhlen (Dry caves)
|
||
W Wasserhöhlen (Caves with water)
|
||
(W) Zeitweilig aktiv Wasserhöhlen (Caves with seasonal water)
|
||
E Eishohlen (Caves with ice formations)
|
||
S Schachthöhlen (Caves with pitches)
|
||
H Halbhöhlen (Rock shelters ?)
|
||
|
||
- unerforscht (unexplored)
|
||
= befahren (visited)
|
||
× teilweise vermessen (partly surveyed)
|
||
+ erforscht (exploration considered complete)
|
||
-->
|
||
<kataster_number>158</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated -->
|
||
<unofficial_number></unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
|
||
|
||
<entrance>
|
||
<entranceslug>1623-158</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
|
||
<!-- DEBUG 1623-158+1623-158 'Z' == -->
|
||
<letter></letter><!--Leave blank for single-entrance cave. If there is more than one entrace then the letter needs to be given. Generally matches the entranceslug ID. -->
|
||
</entrance>
|
||
|
||
<explorers>CUCC 1987</explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
|
||
<survex_file>caves-1623/158/158.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
|
||
<underground_description>A body-width passage formed by a wall on the left and a large detached slab on the right descends for about 5m at 45°, with occasional glimpses of daylight above. A cross passage is then encountered. To the right is blocked after a few metres, but left descends to meet the base of the wall. To the right here, a 20-22cm squeeze is passed by lying on one side. After 2m of further tight progress, the rift opens onto a drop. A steep tube descends for about 12m to a small chamber and with care can be descended free.</p><p>From the chamber, the passage curves to the left and opens onto the head of a 7m pitch, which drops onto a large ledge. A rebelay just over the lip of the ledge at the left hand side gives a further 18m free-hanging pitch to a landing on boulders several metres across, which appear to be jammed across the shaft.</p><p>A narrow rift around a corner stops at a drip and a small pool. The way on is through a gap to a hole with a jammed block. Climbing down to the block leads to the head of an 18m pitch which rapidly opens into a huge split-level chamber. The pitch lands on <b>Big Bertha</b>, a boulder some 4m in diameter. </p><p>To the north, a narrow rift has been followed for about 10m to a tight vertical drop of at least 5m down the rift, but this has not been pushed. East from Big Bertha leads to a 5m drop to the lower half of the chamber, which is floored with loose rock. An archway to the left leads to a 7m pitch to a small stream. This disappears down an impassable slot, but is met lower in the cave.</p><p>From the archway, a climb up behind a boulder propped against the side of the chamber leads to a col. One side rapidly curves up to the roof. The other ascends over very loose boulders for at least 25m (15m vertical) until the roof is met. This area has not been exhaustively pushed, but seems unlikely to lead anywhere.</p><p>Descending the other side of the col gives a series of ledges via 5m, 7m and 8m pitches, in a canyon some 5m wide and at least 15m high. The stream enters at the bottom of the 7m pitch. Below, the rift continues down a moderate slope and round a corner, with a final short 4m pitch to a soil and rock floored chamber.</p><p>A strong draught is felt around the edges of the chamber, rising from the choked floor. It is possible to descend in loose boulders in a number of places but all ways meet the roof and choke - pushing in this area is dangerous and unpromising.</p><p>Near the bottom of the previous pitch, a 5m deep circular pit in the floor can be descended. This takes a large drip from the stream above. At the bottom, a tight (22-26cm) rift leads on for 3m to a further 3m pitch to a small chamber. An impassable passage continues, while a small window gives a view of a widening beyond.</underground_description><!-- Underground description. (description of approach and entrance goes in entrance file). For a small cave this will be the entire description. For larger caves it will be the front page of the description, or a short intro, containing links to other pages with the cave description in, or even nothing but a link. -->
|
||
<equipment></equipment><!-- For a small cave, summary of gear needed to descend. For longer caves it could be blank, a table, or just refer to the description/topos. Leave blank if this info is in the description. -->
|
||
<references></references><!-- References to documentation. Could be Journal articles or Logbook entries. Can be links if the docs are online. -->
|
||
<survey>Grade 3 plan and elevation in <a href="http://cucc.survex.com/jnl/1988/index.htm">Cambridge Underground 1988</a>, p 6</p><p><img alt="E-W Elevation, 15k gif" width="500" height="760" src="others/158ew.png" /></p><p><img alt="Plan, 15k gif" width="840" height="400" src="others/158p.png" /></survey><!-- Drawn-up surveys. Scans of paper surveys or images/PDFs of electronic surveys. Should include HTML to display current plan and elevation, with links to larger versions (See section on URLs and files). Could list links to multiple years of survey, or even a separate survey page if it's complicated enough. -->
|
||
<kataster_status></kataster_status>
|
||
<underground_centre_line>In dataset</underground_centre_line><!-- 'In dataset' if it is in the survex dataset. Blank if not, or notes about status such as 'surveyed, but no entrance fix so not yet in dataset'. -->
|
||
<notes></notes><!-- Normally empty, but place for anything else that should be noted, such as info on cave maybe being a duplicate, or lost -->
|
||
<length></length><!-- Cave length. Can be left blank and system should fill it in automatically from survey data (it doesn't yet) -->
|
||
<depth>continues unsurveyed to approx 128m</depth><!--Cave depth. Can be left blank and system should fill it in automatically from survey data (it doesn't yet) -->
|
||
<extent></extent>
|
||
|
||
<description_file></description_file><!-- Path of top-level description file for this cave, when a separate file is used. Otherwise blank. -->
|
||
<url>1623/158/158.html</url><!-- (Required). Relative URL of this cave. i.e the URL this cave appears at on the website, not including 'https://expo.survex.com/. Normally area/cavenum., e.g ('1623/000')-->
|
||
</cave>
|
||
</body>
|
||
</html>
|