mirror of
https://expo.survex.com/repositories/expoweb/.git/
synced 2024-11-24 08:11:55 +00:00
154 lines
8.6 KiB
HTML
154 lines
8.6 KiB
HTML
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
|
|
<html>
|
|
<head>
|
|
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
|
|
<title>CUCC Expo Rigging Handbook: Placing bolts</title>
|
|
<link rel="stylesheet" type="text/css" href="../../css/main2.css" />
|
|
</head>
|
|
<body>
|
|
<h2 id="tophead"> CUCC Expo Rigging Handbook</h2>
|
|
<h1>Bolt belays - placing</h1>
|
|
|
|
<p>Once you've decided where to put your bolt, you have to actually physically
|
|
place and set it. The methods used differ substantially depending on whether
|
|
you are using hand bolts (spits) or Hilti HKDS's.</p>
|
|
|
|
<p>Before you actually start drilling, it is wise to flatten the surface of the
|
|
rock around the bolt site. This allows the hanger to lie flat against the rock.
|
|
Different types of hanger have different footprints; bollards have almost no
|
|
footprint at all, rings and bends somewhat more, and twists a great deal.
|
|
Remember, of course, that the next person who rigs the pitch may well use a
|
|
different type of hanger from the one you happen to have handy, and that the
|
|
club only has about ten bollards left! When dressing the rock, use the pointed
|
|
end of the hammer and tap gently, so as not to crack the rock below the
|
|
surface.</p>
|
|
|
|
<h2>Hand spits</h2>
|
|
|
|
<div class="onleft" style="clear: left"> <a
|
|
href="../../1623/161/l/boltin.htm"><img alt="(36k image)"
|
|
src="../../1623/161/t/boltin.jpg" width="113" height="152" /></a> <p
|
|
class="caption">Bolting by Hand</p> </div>
|
|
<p>Old-style hand-drilled spits are self-drilling; the spit sleeve functions
|
|
both as a drill bit and as an anchor. Screw it firmly onto the driver and tap
|
|
it gently against the surface of the rock, turning it around slightly between
|
|
each tap and removing it to blow dust away every half dozen blows or so. (You
|
|
should also tap the spit itself gently to free dust compacted into it). Once
|
|
the hole is established you can begin to hit a bit harder, but don't overdo it;
|
|
the idea is to powder the rock at the point of the spit without setting up
|
|
cracks through the rest of the rock which will weaken it.</p>
|
|
|
|
<p>Watch out for the spit <i>cratering</i>; this is when flakes of rock crack
|
|
away around the rim of the hole. A severely cratered spit is greatly weakened
|
|
as the end of the sleeve is not supported by the rock. With some types of
|
|
hanger (bollards and Clowns) it is possible to drive the spit in a bit further
|
|
into the bottom of the crater, particularly if the rope is thin, but this
|
|
renders it almost impossible to use other types of hanger with that spit.</p>
|
|
|
|
<p>There is normally a line around the driver stem around 3mm above the thread;
|
|
keep drilling until this point is reached. (This typically takes around 15-20
|
|
minutes of drilling). Now grab yourself a cone, put it in the end of the spit,
|
|
and hammer it back into the hole. You can normally detect when it is fully set
|
|
by a change in the tone of the sound when you hit it; it should rise gradually
|
|
to a high ring. If the hole is the right depth this will coincide with the spit
|
|
being flush with the surface. Now you can remove the driver and screw in a
|
|
hanger, and Bob's your uncle.</p>
|
|
|
|
<h3>Peter and Phil's photo guide to placing a spit</h3>
|
|
|
|
<img src="hand_bolting_guide/img_2989.jpg" /><p>Decide where you want your bolt to go.</p>
|
|
<img src="hand_bolting_guide/img_2990.jpg" /><p>Before you start drilling, "dress" the rock; that is, hammer away the flaky top surface of the rock and flatten out a small area around where your spit is to go.</p>
|
|
<img src="hand_bolting_guide/img_2991.jpg" /><p>Hold the spit driver perpendicular to the rock and start hitting it, gently at first, while rotating it clockwise in between taps.</p>
|
|
<img src="hand_bolting_guide/img_2993.jpg" /><p>Make sure the driver is perpendicular to the rock surface.</p>
|
|
<img src="hand_bolting_guide/img_2995.jpg" /><p>After every few taps, blow the dust out of the hole.</p>
|
|
<img src="hand_bolting_guide/img_3001.jpg" /><p>It also helps to give the driver a tap to remove dust caked up on the end.</p>
|
|
<img src="hand_bolting_guide/img_3002.jpg" /><p>When the hole is as deep as the line around the driver shaft (about 3mm beyond the rim of the spit itself), the spit can be set. Take a cone, and fit it into the end of the driver,</p>
|
|
<img src="hand_bolting_guide/img_3003.jpg" /><p>like so.</p>
|
|
<img src="hand_bolting_guide/img_3005.jpg" /><p>Now hammer it in (without turning it, which would rapidly become impossible) until the spit is flush with the surface.</p>
|
|
<img src="hand_bolting_guide/img_3006.jpg" /><p>Finally, squirt a bit of grease into the spit to keep it from corroding. Notice that this spit is rather deep in, and would probably be rather hard to use for a rigging bolt; more dressing would be needed as well. This bolt was actually for the tag on cave 2005-07, and tag bolts clearly needn't be all that strong.</p>
|
|
<img src="hand_bolting_guide/img_3007.jpg" /><p>Finished spit.</p>
|
|
|
|
|
|
|
|
|
|
<h2>Power-drills and Hilti anchors</h2>
|
|
|
|
<div class="onleft"><a href="../l/bosch.htm"><img
|
|
alt="(73k image)" src="../t/bosch.jpg" width="200" height="200" /></a><p
|
|
class="caption">Using the Drill</p></div>
|
|
|
|
<p>Since the first cordless hammer drills made an appearance on Expo 1990
|
|
thanks to sponsorship from Bosch, drills have been enthusiastically adopted as
|
|
the best solution for large-scale bolting tasks; some of the fun and games of
|
|
recent years, like the 21-bolt traverse over Gaffered to the Walls in 2003,
|
|
would be unthinkable with hand bolts. However, drills are not suited to use
|
|
with ordinary spits, as the setting process depends critically on the bottom of
|
|
the hole being flat. It is possible to drill a hole part-way with a power drill
|
|
and finish it off by hand, but this is tedious.</p>
|
|
|
|
<p>Hence we have found it easier to use Hilti anchors, which are specifically
|
|
designed for use in drilled holes.</p>
|
|
|
|
<div style="text-align: center">
|
|
<a href="../../years/1990/hilti1-300.png"><img
|
|
alt="before setting - 1k png" width="530" height="90" style="margin: 10pt"
|
|
src="../../years/1990/hilti1-100.png" /></a><br />
|
|
<b>Hilti HDK spits before and after setting.</b><br />
|
|
<a href="../../years/1990/hilti2-300.png"><img alt="after setting - 1k png"
|
|
width="220" height="94"
|
|
src="../../years/1990/hilti2-100.png" style="margin: 10pt" /></a></div>
|
|
|
|
<p>There are two versions of these bolts, the HKD and the HKDS. The latter are
|
|
easier to use, as they have a "shoulder" around the top of the bolt which sits
|
|
against the rock, meaning that the depth of the hole is not important.</p>
|
|
|
|
<p>To place a HKDS, drill the hole in the obvious manner until it is deep
|
|
enough for the bolt to sit in without touching the bottom. If in doubt, drill
|
|
it deep! When the hole is deep enough, grab a setting tool and start bashing it.</p>
|
|
|
|
<p>Start with very gentle taps. The reason for this is so the shoulder can hold
|
|
the bolt in position until it begins to grip the sides of the hole; if you
|
|
start by smashing it with all your might, the shoulder will bend and the bolt
|
|
will disappear, useless, into the depths of the hole. Once it has some grip you
|
|
can start hitting a bit harder.</p>
|
|
|
|
<p>It is very important to hit the Hilti setting tools exactly square, as they
|
|
are made of very hard steel which is rather brittle and hence it is easy to
|
|
shear the end off. When the bolt is fully set, you should be able to see marks
|
|
on the shoulder of the spit from the four little teeth on the collar of the
|
|
driver; don't worry if you can't see all four setting marks, but aim for two at
|
|
least - one can easily be a consequence of leaning the driver over too far to
|
|
one side.</p>
|
|
|
|
<p>Sometimes, in particularly hard rock, it can be impossible to get the
|
|
setting marks. Use your judgement; if you're not making any progress despite
|
|
sustained hammering, it's probably OK to stop!</p>
|
|
|
|
<hr />
|
|
|
|
<ul id="links">
|
|
<li><a href="../index.htm">Expedition Handbook</a> - Contents
|
|
<ul>
|
|
<li><a href="index.htm">Rigging Guide</a>
|
|
<ul>
|
|
<li><a href="intro.htm">Introduction</a></li>
|
|
<li><a href="boltplace.html">Choosing bolt locations</a></li>
|
|
<li>The mechanics of placing a bolt</li>
|
|
<li><a href="exporig.html">Expo-specific rigging tricks</a></li>
|
|
</ul></li>
|
|
<li><a href="../look4.htm">Prospecting guide</a></li>
|
|
<li><a href="../survey/index.htm">Surveying guide</a></li>
|
|
<li><a href="../rescue.htm">Rescue guide</a></li>
|
|
<li><a href="../photo.htm">Photography guide</a></li>
|
|
</ul></li>
|
|
<li><a href="../../infodx.htm">Index to info/topics pages</a></li>
|
|
<li><a href="../../indxal.htm">Full Index to area 1623</a>
|
|
<ul>
|
|
<li><a href="../../areas.htm">Area/subarea descriptions</a></li>
|
|
</ul></li>
|
|
<li><a href="../../index.htm">Back to Expedition Intro page</a></li>
|
|
<li><a href="../../../index.htm">Back to CUCC Home page</a></li>
|
|
</ul>
|
|
</body>
|
|
</html>
|