replace ARGE-or-VfHO with less specific explorers

cave_data/1623-216.html

@@ -44,7 +44,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
   <letter></letter><!--Leave blank for single-entrance cave. If there is more than one entrace then the letter needs to be given. Generally matches the entranceslug ID.  -->
 </entrance>
 
-<explorers>ARGE-or-VfHO</explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
+<explorers>not-CUCC-Expo</explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1623/216/216.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
 <underground_description></underground_description><!-- Underground description. (description of approach and entrance goes in entrance file). For a small cave this will be the entire description. For larger caves it will be the front page of the description, or a short intro, containing links to other pages with the cave description in, or even nothing but a link. -->
 <equipment></equipment><!-- For a small cave, summary of gear needed to descend. For longer caves it could be blank, a table, or just refer to the description/topos. Leave blank if this info is in the description. -->

cave_data/1623-229.html

@@ -21,7 +21,7 @@
   <letter></letter>
 </entrance>
 
-<explorers>ARGE-or-VfHO (Thilo et al, July 2000). Relocated and confirmatory survey carried out CUCC 2002 (Olly Betts, Wookey)</explorers>
+<explorers>not-CUCC-Expo (Thilo et al, July 2000). Relocated and confirmatory survey carried out CUCC 2002 (Olly Betts, Wookey)</explorers>
 <underground_description></underground_description>
 <equipment></equipment>
 <references></references>

cave_data/1623-232.html

@@ -43,7 +43,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
   <letter></letter><!--Leave blank for single-entrance cave. If there is more than one entrance then the letter needs to be given. Must match the entranceslug ID.  -->
 </entrance>
 
-<explorers>ARGE-or-VfHO</explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
+<explorers>not-CUCC-Expo</explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1623/232/232.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
 <underground_description>Entrance is immediately above the campsite previously used by ARGE; an area of flat limestone into which anchors have been placed (hangers present in 2024).</p><a href='/1623/232/l/old-ARGE-campsite-with-hangers.html'><img src='/1623/232/t/old-ARGE-campsite-with-hangers.jpg' /></a>
 <p>Previous ARGE campsite</p>

cave_data/1623-233.html

@@ -41,7 +41,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
   <letter></letter><!--Leave blank for single-entrance cave. If there is more than one entrace then the letter needs to be given. Generally matches the entranceslug ID.  -->
 </entrance>
 
-<explorers>ARGE-or-VfHO</explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
+<explorers>not-CUCC-Expo</explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1623/233/233.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
 <underground_description></underground_description><!-- Underground description. (description of approach and entrance goes in entrance file). For a small cave this will be the entire description. For larger caves it will be the front page of the description, or a short intro, containing links to other pages with the cave description in, or even nothing but a link. -->
 <equipment></equipment><!-- For a small cave, summary of gear needed to descend. For longer caves it could be blank, a table, or just refer to the description/topos. Leave blank if this info is in the description. -->

cave_data/1623-252.html

@@ -44,7 +44,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
   <letter></letter><!--Leave blank for single-entrance cave. If there is more than one entrace then the letter needs to be given. Generally matches the entranceslug ID.  -->
 </entrance>
 
-<explorers>ARGE-or-VfHO</explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
+<explorers>not-CUCC-Expo</explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1623/252/252.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
 <underground_description></underground_description><!-- Underground description. (description of approach and entrance goes in entrance file). For a small cave this will be the entire description. For larger caves it will be the front page of the description, or a short intro, containing links to other pages with the cave description in, or even nothing but a link. -->
 <equipment></equipment><!-- For a small cave, summary of gear needed to descend. For longer caves it could be blank, a table, or just refer to the description/topos. Leave blank if this info is in the description. -->

cave_data/1623-281.html

@@ -29,7 +29,7 @@ the form documented at
   <letter></letter>
 </entrance>
 
-<explorers><p>ARGE-or-VfHO presumably</p></explorers>
+<explorers><p>not-CUCC-Expo presumably</p></explorers>
 <survex_file>caves-1623/281/281.svx</survex_file>
 <underground_description></underground_description>
 <equipment></equipment>

cave_data/1624-1.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>1</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1624-1</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -45,7 +45,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1624/1/1.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 1
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 1
 ;GPS-Punk bei der Ohrhöhle
 
 

cave_data/1624-122.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>122</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1624-122</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->

cave_data/1624-138.html

@@ -46,7 +46,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1624/138/138.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.</underground_description><!-- Underground description. (description of approach and entrance goes in entrance file). For a small cave this will be the entire description. For larger caves it will be the front page of the description, or a short intro, containing links to other pages with the cave description in, or even nothing but a link. -->
+<underground_description>not-CUCC-Expo cave.</underground_description><!-- Underground description. (description of approach and entrance goes in entrance file). For a small cave this will be the entire description. For larger caves it will be the front page of the description, or a short intro, containing links to other pages with the cave description in, or even nothing but a link. -->
 <equipment></equipment><!-- For a small cave, summary of gear needed to descend. For longer caves it could be blank, a table, or just refer to the description/topos. Leave blank if this info is in the description. -->
 <references></references><!-- References to documentation. Could be Journal articles or Logbook entries. Can be links if the docs are online. -->
 <survey></survey><!-- Drawn-up surveys. Scans of paper surveys or images/PDFs of electronic surveys. Should include HTML to display current plan and elevation, with links to larger versions (See section on URLs and files). Could list links to multiple years of survey, or even a separate survey page if it's complicated enough. -->

cave_data/1624-162.html

@@ -46,7 +46,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1624/162/162.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile:<br><pre>*begin 162
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile:<br><pre>*begin 162
 ;Os eologinnenhöhle
 
 </pre></underground_description><!-- Underground description. (description of approach and entrance goes in entrance file). For a small cave this will be the entire description. For larger caves it will be the front page of the description, or a short intro, containing links to other pages with the cave description in, or even nothing but a link. -->

cave_data/1624-170.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>170</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1624-170</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -46,7 +46,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1624/170/170.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 170
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 170
 ;Dreiganghöhle
 
 

cave_data/1624-190.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>190</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1624-190</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -46,7 +46,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1624/190/190.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 190
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 190
 ;Schweigende Höhle
 
 

cave_data/1626-10.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>10</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-10</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -46,7 +46,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/10/10.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 10
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 10
 *begin Aussenvermessung
 *flags surface
 

cave_data/1626-101.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>101</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-101</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -46,7 +46,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/101/101.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 101
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 101
 *begin Mike-Luckwill-Schacht
 *data cartesian from to dx dy dz
 

cave_data/1626-102.html

@@ -22,7 +22,7 @@ the form documented at
 <area>1626</area>
 <kataster_code>-</kataster_code>
 <kataster_number>102</kataster_number> 
-<unofficial_number>ARGE-or-VfHO</unofficial_number>
+<unofficial_number>not-CUCC-Expo</unofficial_number>
 
 <entrance>
   <entranceslug>1626-102</entranceslug>
@@ -31,7 +31,7 @@ the form documented at
 
 <explorers></explorers>
 <survex_file>caves-1626/102/102.svx</survex_file>
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 102
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 102
 *begin Kameradschaftshoehle
 *data cartesian from to dx dy dz
 

cave_data/1626-106.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>106</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-106</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -45,7 +45,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/106/106.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 106
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 106
 *begin Hauptgruppe
 *begin 1
 

cave_data/1626-107.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>107</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-107</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -45,7 +45,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/107/107.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 107
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 107
 *begin Hauptgruppe
 *begin 1
 

cave_data/1626-111.html

@@ -22,7 +22,7 @@ the form documented at
 <area>1626</area>
 <kataster_code>-</kataster_code>
 <kataster_number>111</kataster_number> 
-<unofficial_number>ARGE-or-VfHO</unofficial_number>
+<unofficial_number>not-CUCC-Expo</unofficial_number>
 
 <entrance>
   <entranceslug>1626-111</entranceslug>
@@ -31,7 +31,7 @@ the form documented at
 
 <explorers></explorers>
 <survex_file>caves-1626/111/111.svx</survex_file>
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 111
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 111
 *begin Wehrkogelhoehle
 *begin 1
 

cave_data/1626-114.html

@@ -22,7 +22,7 @@ the form documented at
 <area>1626</area>
 <kataster_code></kataster_code>
 <kataster_number>114</kataster_number> 
-<unofficial_number>ARGE-or-VfHO</unofficial_number>
+<unofficial_number>not-CUCC-Expo</unofficial_number>
 
 <entrance>
   <entranceslug>1626-114</entranceslug>
@@ -31,7 +31,7 @@ the form documented at
 
 <explorers></explorers>
 <survex_file>caves-1626/114/114.svx</survex_file>
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 114
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 114
 *begin Faltenhoehle
 *begin 1
 

cave_data/1626-118.html

@@ -46,7 +46,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/118/118.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile:<br><pre>*begin 118
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile:<br><pre>*begin 118
 *begin Ottoloch_H2
 *begin 1
 </pre></underground_description><!-- Underground description. (description of approach and entrance goes in entrance file). For a small cave this will be the entire description. For larger caves it will be the front page of the description, or a short intro, containing links to other pages with the cave description in, or even nothing but a link. -->

cave_data/1626-13.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>13</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-13</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -46,7 +46,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/13/13.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 13
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 13
 *begin Fliegenschacht
 *begin 1
 

cave_data/1626-154.html

@@ -46,7 +46,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/154/154.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile:<br><pre>*begin 154
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile:<br><pre>*begin 154
 *begin Flaschenschacht
 *begin 1
 </pre></underground_description><!-- Underground description. (description of approach and entrance goes in entrance file). For a small cave this will be the entire description. For larger caves it will be the front page of the description, or a short intro, containing links to other pages with the cave description in, or even nothing but a link. -->

cave_data/1626-155.html

@@ -46,7 +46,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/155/155.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile:<br><pre>*begin 155
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile:<br><pre>*begin 155
 *begin Schneekirchl
 *begin 1
 </pre></underground_description><!-- Underground description. (description of approach and entrance goes in entrance file). For a small cave this will be the entire description. For larger caves it will be the front page of the description, or a short intro, containing links to other pages with the cave description in, or even nothing but a link. -->

cave_data/1626-16.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>16</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-16</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -46,7 +46,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/16/16.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 16
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 16
 *begin Eingangsteil
 *begin 1
 

cave_data/1626-164.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>164</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-164</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -45,7 +45,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/164/164.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 164
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 164
 *begin Schachtchen
 *begin 1
 

cave_data/1626-181.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>181</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-181</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -45,7 +45,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/181/181.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 181
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 181
 *begin Eisbogenschacht
 *begin 1
 

cave_data/1626-184.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>184</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-184</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -45,7 +45,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/184/184.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 184
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 184
 *begin Megalodontenschacht-Haupteingang
 *begin 1
 

cave_data/1626-185.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>185</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-185</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -45,7 +45,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/185/185.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 185
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 185
 *begin Hauptgruppe
 *begin 1
 

cave_data/1626-187.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>187</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-187</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -46,7 +46,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/187/187.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile:<br><pre>*begin 187
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile:<br><pre>*begin 187
 *begin Christbaumloch
 *begin 1
 </pre></underground_description><!-- Underground description. (description of approach and entrance goes in entrance file). For a small cave this will be the entire description. For larger caves it will be the front page of the description, or a short intro, containing links to other pages with the cave description in, or even nothing but a link. -->

cave_data/1626-188.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>188</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-188</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -45,7 +45,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/188/188.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 188
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 188
 *begin Canyon
 *begin 1
 

cave_data/1626-189.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>189</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-189</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -45,7 +45,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/189/189.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 189
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 189
 *begin Aussenvermessung
 *flags surface
 

cave_data/1626-197.html

@@ -22,7 +22,7 @@ the form documented at
 <area>1626</area>
 <kataster_code></kataster_code>
 <kataster_number>197</kataster_number> 
-<unofficial_number>ARGE-or-VfHO</unofficial_number>
+<unofficial_number>not-CUCC-Expo</unofficial_number>
 
 <entrance>
   <entranceslug>1626-197</entranceslug>
@@ -31,7 +31,7 @@ the form documented at
 
 <explorers></explorers>
 <survex_file>caves-1626/197/197.svx</survex_file>
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 197
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 197
 *begin Hutforscherhoehle
 *begin 1
 

cave_data/1626-199.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>199</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-199</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -45,7 +45,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/199/199.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 199
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 199
 *begin Rinnerts_Loch
 *begin 1
 

cave_data/1626-2.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>2</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-2</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -46,7 +46,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/2/2.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 2
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 2
 *begin Kein-Problem-Schacht
 *begin 1
 

cave_data/1626-200.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>200</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-200</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -45,7 +45,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/200/200.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 200
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 200
 *begin Einstiegschacht
 *begin 1
 

cave_data/1626-202.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>202</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-202</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -46,7 +46,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/202/202.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile:<br><pre>*begin 202
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile:<br><pre>*begin 202
 *begin Ab_in_den_Sueden
 *begin 1
 </pre></underground_description><!-- Underground description. (description of approach and entrance goes in entrance file). For a small cave this will be the entire description. For larger caves it will be the front page of the description, or a short intro, containing links to other pages with the cave description in, or even nothing but a link. -->

cave_data/1626-203.html

@@ -22,7 +22,7 @@ the form documented at
 <area>1626</area>
 <kataster_code></kataster_code>
 <kataster_number>203</kataster_number> 
-<unofficial_number>ARGE-or-VfHO</unofficial_number>
+<unofficial_number>not-CUCC-Expo</unofficial_number>
 
 <entrance>
   <entranceslug>1626-203</entranceslug>
@@ -31,7 +31,7 @@ the form documented at
 
 <explorers></explorers>
 <survex_file>caves-1626/203/203.svx</survex_file>
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile:<br><pre>*begin 203
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile:<br><pre>*begin 203
 *begin Wildkar-Höhle
 *begin 1
 </pre></underground_description>

cave_data/1626-205.html

@@ -22,7 +22,7 @@ the form documented at
 <area>1626</area>
 <kataster_code></kataster_code>
 <kataster_number>205</kataster_number> 
-<unofficial_number>ARGE-or-VfHO</unofficial_number>
+<unofficial_number>not-CUCC-Expo</unofficial_number>
 
 <entrance>
   <entranceslug>1626-205</entranceslug>

cave_data/1626-207.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>207</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-207</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -46,7 +46,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/207/207.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile:<br><pre>*begin 207
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile:<br><pre>*begin 207
 *begin Innenvermessung
 *begin 1
 </pre></underground_description><!-- Underground description. (description of approach and entrance goes in entrance file). For a small cave this will be the entire description. For larger caves it will be the front page of the description, or a short intro, containing links to other pages with the cave description in, or even nothing but a link. -->

cave_data/1626-257.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>257</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-257</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -46,7 +46,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/257/257.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile:<br><pre>*begin 257
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile:<br><pre>*begin 257
 *begin Einstiegsschacht
 *begin 1
 </pre></underground_description><!-- Underground description. (description of approach and entrance goes in entrance file). For a small cave this will be the entire description. For larger caves it will be the front page of the description, or a short intro, containing links to other pages with the cave description in, or even nothing but a link. -->

cave_data/1626-264.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>264</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-264</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -45,7 +45,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/264/264.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 264
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 264
 *title 1626-264
 *begin Hauptgruppe
 

cave_data/1626-27.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>27</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-27</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -46,7 +46,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/27/27.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 27
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 27
 *begin Aussenvermessung
 *flags surface
 

cave_data/1626-275.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>275</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-275</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -45,7 +45,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/275/275.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 275
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 275
 *begin Hauptgruppe
 *begin 1
 

cave_data/1626-29.html

@@ -22,7 +22,7 @@ the form documented at
 <area>1626</area>
 <kataster_code></kataster_code>
 <kataster_number>29</kataster_number> 
-<unofficial_number>ARGE-or-VfHO</unofficial_number>
+<unofficial_number>not-CUCC-Expo</unofficial_number>
 
 <entrance>
   <entranceslug>1626-29</entranceslug>
@@ -31,7 +31,7 @@ the form documented at
 
 <explorers></explorers>
 <survex_file>caves-1626/29/29.svx</survex_file>
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 29
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 29
 *begin Sonnscheinhoehle
 *begin 1
 

cave_data/1626-3.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>3</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-3</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -46,7 +46,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/3/3.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 3
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 3
 *begin Toti-Eisloch
 *begin 1
 

cave_data/1626-33.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>33</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-33</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -45,7 +45,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/33/33.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 33
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 33
 *begin Horizontalteil
 *begin 1
 

cave_data/1626-40.html

@@ -22,7 +22,7 @@ the form documented at
 <area>1626</area>
 <kataster_code></kataster_code>
 <kataster_number>40</kataster_number> 
-<unofficial_number>ARGE-or-VfHO</unofficial_number>
+<unofficial_number>not-CUCC-Expo</unofficial_number>
 
 <entrance>
   <entranceslug>1626-40</entranceslug>
@@ -31,7 +31,7 @@ the form documented at
 
 <explorers></explorers>
 <survex_file>caves-1626/40/40.svx</survex_file>
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 40
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 40
 *begin Fritzlhoehle
 *begin 1
 

cave_data/1626-46.html

@@ -22,7 +22,7 @@ the form documented at
 <area>1626</area>
 <kataster_code></kataster_code>
 <kataster_number>46</kataster_number> 
-<unofficial_number>ARGE-or-VfHO</unofficial_number>
+<unofficial_number>not-CUCC-Expo</unofficial_number>
 
 <entrance>
   <entranceslug>1626-46</entranceslug>
@@ -31,7 +31,7 @@ the form documented at
 
 <explorers></explorers>
 <survex_file>caves-1626/46/46.svx</survex_file>
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 46
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 46
 *begin 46a-Eingangshalle
 *begin 1
 

cave_data/1626-49.html

@@ -22,7 +22,7 @@ the form documented at
 <area>1626</area>
 <kataster_code></kataster_code>
 <kataster_number>49</kataster_number> 
-<unofficial_number>ARGE-or-VfHO</unofficial_number>
+<unofficial_number>not-CUCC-Expo</unofficial_number>
 
 <entrance>
   <entranceslug>1626-49</entranceslug>
@@ -31,7 +31,7 @@ the form documented at
 
 <explorers></explorers>
 <survex_file>caves-1626/49/49.svx</survex_file>
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 49
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 49
 *begin Felsbogenhoehle
 *begin 1
 

cave_data/1626-52.html

@@ -22,7 +22,7 @@ the form documented at
 <area>1626</area>
 <kataster_code>-</kataster_code>
 <kataster_number>52</kataster_number> 
-<unofficial_number>ARGE-or-VfHO</unofficial_number>
+<unofficial_number>not-CUCC-Expo</unofficial_number>
 
 <entrance>
   <entranceslug>1626-52</entranceslug>
@@ -31,7 +31,7 @@ the form documented at
 
 <explorers></explorers>
 <survex_file>caves-1626/52/52.svx</survex_file>
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 52
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 52
 *begin Grushoehle
 *begin 1
 

cave_data/1626-63.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>63</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-63</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -45,7 +45,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/63/63.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 63
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 63
 *begin Angstroehre
 *begin 1
 

cave_data/1626-7.html

@@ -22,7 +22,7 @@ the form documented at
 <area>1626</area>
 <kataster_code></kataster_code>
 <kataster_number>7</kataster_number> 
-<unofficial_number>ARGE-or-VfHO</unofficial_number>
+<unofficial_number>not-CUCC-Expo</unofficial_number>
 
 <entrance>
   <entranceslug>1626-7</entranceslug>
@@ -31,7 +31,7 @@ the form documented at
 
 <explorers></explorers>
 <survex_file>caves-1626/7/7.svx</survex_file>
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 7
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 7
 *begin Mittereckhoehle
 *begin 10
 

cave_data/1626-70.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>70</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-70</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -45,7 +45,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/70/70.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 70
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 70
 *begin Hauptgruppe
 *begin 1
 

cave_data/1626-71.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>71</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-71a</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -46,7 +46,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/71/71.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 71
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 71
 *begin Zick-Zack-Schacht
 *begin 1
 

cave_data/1626-8.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>8</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-8</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -50,7 +50,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/8/8.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 8
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 8
 *begin Hauptgruppe
 *begin 1
 

cave_data/1626-83.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>83</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-83</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -45,7 +45,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/83/83.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 83
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 83
 *begin Roehrenloch
 *begin 1
 

cave_data/1626-89.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>89</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (This is any name. Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-89</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -45,7 +45,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/89/89.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 89
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 89
 *begin Judithschacht
 *begin 1
 

cave_data/1626-9.html

@@ -36,7 +36,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
     +   erforscht (exploration considered complete)
  -->
 <kataster_number>9</kataster_number> <!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated  -->
-<unofficial_number>ARGE-or-VfHO</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
+<unofficial_number>not-CUCC-Expo</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
 
 <entrance>
   <entranceslug>1626-9</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
@@ -46,7 +46,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
 
 <explorers></explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/9/9.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
-<underground_description>ARGE-or-VfHO cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 9
+<underground_description>not-CUCC-Expo cave.<br>3 lines of the survexfile, then all the *begin lines:<br><pre>*begin 9
 *begin Hauptgruppe
 *begin 1
 

cave_data/1626-E09.html

@@ -44,7 +44,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
   <letter></letter><!--Leave blank for single-entrance cave. If there is more than one entrace then the letter needs to be given. Generally matches the entranceslug ID.  -->
 </entrance>
 
-<explorers>ARGE-or-VfHO, 2007, Hinterland</explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
+<explorers>not-CUCC-Expo, 2007, Hinterland</explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/E09/e09.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
 <underground_description></underground_description><!-- Underground description. (description of approach and entrance goes in entrance file). For a small cave this will be the entire description. For larger caves it will be the front page of the description, or a short intro, containing links to other pages with the cave description in, or even nothing but a link. -->
 <equipment></equipment><!-- For a small cave, summary of gear needed to descend. For longer caves it could be blank, a table, or just refer to the description/topos. Leave blank if this info is in the description. -->

cave_data/1626-E16.html

@@ -44,7 +44,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
   <letter></letter><!--Leave blank for single-entrance cave. If there is more than one entrace then the letter needs to be given. Generally matches the entranceslug ID.  -->
 </entrance>
 
-<explorers>ARGE-or-VfHO, 2009, Hinterland</explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
+<explorers>not-CUCC-Expo, 2009, Hinterland</explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/E16/e16.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
 <underground_description></underground_description><!-- Underground description. (description of approach and entrance goes in entrance file). For a small cave this will be the entire description. For larger caves it will be the front page of the description, or a short intro, containing links to other pages with the cave description in, or even nothing but a link. -->
 <equipment></equipment><!-- For a small cave, summary of gear needed to descend. For longer caves it could be blank, a table, or just refer to the description/topos. Leave blank if this info is in the description. -->

cave_data/1626-E28.html

@@ -44,7 +44,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
   <letter></letter><!--Leave blank for single-entrance cave. If there is more than one entrace then the letter needs to be given. Generally matches the entranceslug ID.  -->
 </entrance>
 
-<explorers>ARGE-or-VfHO, 2007, Hinterland</explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
+<explorers>not-CUCC-Expo, 2007, Hinterland</explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/E28/e28.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
 <underground_description>100m-Schacht</underground_description><!-- Underground description. (description of approach and entrance goes in entrance file). For a small cave this will be the entire description. For larger caves it will be the front page of the description, or a short intro, containing links to other pages with the cave description in, or even nothing but a link. -->
 <equipment></equipment><!-- For a small cave, summary of gear needed to descend. For longer caves it could be blank, a table, or just refer to the description/topos. Leave blank if this info is in the description. -->

cave_data/1626-casino-01.html

@@ -42,7 +42,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
   <letter></letter><!--Leave blank for single-entrance cave. If there is more than one entrace then the letter needs to be given. Generally matches the entranceslug ID.  -->
 </entrance>
 
-<explorers>ARGE-or-VfHO, 2007</explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
+<explorers>not-CUCC-Expo, 2007</explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/casino-01/casino.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
 <underground_description></underground_description><!-- Underground description. (description of approach and entrance goes in entrance file). For a small cave this will be the entire description. For larger caves it will be the front page of the description, or a short intro, containing links to other pages with the cave description in, or even nothing but a link. -->
 <equipment></equipment><!-- For a small cave, summary of gear needed to descend. For longer caves it could be blank, a table, or just refer to the description/topos. Leave blank if this info is in the description. -->

cave_data/1626-upside-down-01.html

@@ -41,7 +41,7 @@ code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast
   <letter></letter><!--Leave blank for single-entrance cave. If there is more than one entrace then the letter needs to be given. Generally matches the entranceslug ID.  -->
 </entrance>
 
-<explorers>ARGE-or-VfHO 2008</explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
+<explorers>not-CUCC-Expo 2008</explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
 <survex_file>caves-1626/upside-down-01/upside-down.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
 <underground_description><pre>; Totes Gebirge, Österreich - Loser/Augst-Eck Plateau (Katastergebiet 1623)
 ; Höhle: Upside-Down 1623/x</pre></underground_description><!-- Underground description. (description of approach and entrance goes in entrance file). For a small cave this will be the entire description. For larger caves it will be the front page of the description, or a short intro, containing links to other pages with the cave description in, or even nothing but a link. -->