expoweb/handbook/rig/intro.htm

149 lines
7.6 KiB
HTML
Raw Normal View History

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html>
2001-08-15 19:29:27 +01:00
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>CUCC Expedition Rigging Handbook: Introduction</title>
<link rel="stylesheet" type="text/css" href="../../css/main2.css" />
2001-08-15 19:29:27 +01:00
</head>
<body>
<h2 id="tophead">CUCC Expo Rigging Handbook</h2>
<h1>Introduction</h1>
2001-08-15 19:29:27 +01:00
<h3>Prerequisites:</h3>
<p>This section of the Expo handbook assumes that you are familiar with all
the usual manoeuvres, such as passing knots, rebelays and deviations,
changing from abseil to prusik and vice versa. "Familiar" means you can do it
in the dark with cold hands, with complete confidence in your safety and with
reasonable efficiency. Choice of ropes is not covered, as by the time you are
on the expedition it will be too late ! Neither is this guide concerned with
personal SRT equipment except where the demands of caving in Austria require
gear in addition to that you would normally use on a typical Yorkshire
weekend.</p>
2001-08-15 19:29:27 +01:00
<p>Self-rescue may also be important in Austria - this should be covered in
the rescue guide (but isn't - yet). It is recommended that you should
practice all these techniques somewhere safe and warm - preferably in the UK
before departure rather than up a tree behind the potato hut in a
thunderstorm!</p>
2001-08-15 19:29:27 +01:00
<h3>Differences from Yorkshire.</h3>
<p>This is new exploration, so you cannot rely on belays to have been tested
by previous generations of cavers. Similarly, loose rocks will not have been
cleared or dislodged by earlier parties. Natural belays may not be available,
so you will have to place bolts, rather than look for the shiny P-hangers
placed by CNCC parties. You won't know in advance how long pitches are going
to be, so the ropes you have with you may need to be cut or knotted. Party
size is usually small - everyone needs to be able to make a contribution to
safe rigging. The first one down may be rigging a new rope to replace a
damaged one, or one of less than ideal length. The second may have to remove
the old rope on his descent.</p>
2001-08-15 19:29:27 +01:00
<p>Conversely, the caves are deeper, longer and colder than Yorkshire, so
parties need to move safely and efficiently to avoid exhaustion and exposure.
Flooding on pitches can be sudden and severe, water very cold, and the
location of flood inlets not always obvious - rigging for security in flood
is often critical. Ropes remain in place over several trips, and rock may be
very sharp - every party must be alert to the danger of abrasion and be
prepared to rerig if necessary. Finally, rigging points placed on exploration
may need to be used on expeditions for years to come, so maintenance of bolts
on the final derigging trips is important.</p>
2001-08-15 19:29:27 +01:00
<h3>A New Pitch !</h3>
<p>So your cave goes, and you have reached a large black space. Whether your
reaction is joy or terror, there are a few things to consider before
leaping, lemming-like, into the void on a handy piece of string, or running
back to top camp to announce that the cave is "bottomless".</p>
2001-08-15 19:29:27 +01:00
<p>How deep is the pitch ? Where would be the ideal line of descent, avoiding
rub points, loose rock, mud and/or water ? Is there an obvious traverse
level across the top of the pitch, or a short way down ? Can you actually
<b><i>see</i></b> any of this without starting to rig ? Look across the
pitch as well as down it - there may be accessible passage still to
explore and always a chance that the pitch can be climbed or bypassed
entirely. Look up too: if there is an aven it may give a clue as to where
flood inlets might appear, or there may be loose rock or ice formations
up there to be considered.</p>
2001-08-15 19:29:27 +01:00
<p>The traditional method of judging the depth of a pitch is to lob a rock
down. <span lang="fr">Casteret</span> always used to wrap his rock in a copy
2001-08-15 19:29:27 +01:00
of "<i lang="fr">Le Monde</i>" and set it alight before casting it into the
void. Before chucking <b>anything</b> down a pitch, consider whether there
could be another party down there, perhaps having come by an entirely
different route. In <span lang="de">Kaninchenh&ouml;hle</span> in
particular, this is a very real possibility.</p>
2001-08-15 19:29:27 +01:00
<p>A traverse/security line is often useful to approach the edge of a new
pitch. This may or may not become a permanent part of the rigging, but
until the safety of the pitch head has been assessed, it is better to be
safe than sorry. Such a rope will often enable you to reach a better
viewpoint (or rock-chucking point :-) to assess the pitch, and certainly
confers a greater degree of confidence when scrambling about looking for
potential rig points.</p>
2001-08-15 19:29:27 +01:00
<p>When throwing your rock, only the time to the first bounce is really
relevant, unless it continues to rattle on for <b>very much</b> longer. If
you can drop it in a "free hang" then this will give you a good idea of the
minimum length of rope needed before a rebelay is required.</p>
2001-08-15 19:29:27 +01:00
<h3>Rigging it</h3>
<p>There are two two obvious tactical errors you can make when rigging a new
pitch. On the one hand, you can spend ages bolting a perfect hang, only
for the first person to find the pitch ends blind. On the other hand, you
can bodge up a rig to check that it goes, then fail to rig properly before
it takes a lot of traffic. The first error is frustrating and limits your
finding of new stuff. The second error can be terminal at worst and at best
can waste a lot more time than would have been needed to rig properly.</p>
2001-08-15 19:29:27 +01:00
<p>If a pitch is roomy, draughts strongly or is in an immensely promising
location, it is probably worth taking the time to rig it properly from the
start. If the pitch is small, has no draught or is likely to drop back into a
known part of the cave, it is probably better to send someone down before
investing too much effort. You can make it safe pretty quickly with rope
protectors and perhaps deviations off naturals, without taking the time to
place bolts which you will need for a more permanent rig.</p>
2001-08-15 19:29:27 +01:00
<p>Experience in the UK should have given you a good feel for when a pitch
is well-rigged. It won't take too long in Austria to get a feel for how
it can go wrong. If you find a pitch badly rigged by someone else, don't
assume it must be OK because they survived. If you can improve the rig,
do so; if not, consider carefully whether you should go down at all.</p>
2001-08-15 19:29:27 +01:00
<p>A well-rigged pitch should not be overly gymnastic, nor, ideally, should
it have either very long or very short sections, which result in a lot of
waiting around for the other person(s) in a group. Loops at rebelays should
not disappear when the rope is unloaded, and should be long enough to allow
the removal of any type of descender. They do not need to be long enough to
stand in - especially if the pitch above is short. Overmuch slack at a
rebelay will result in a high fall-factor if the belay fails.</p>
<hr />
<ul id="links">
<li><a href="../index.htm">Expedition Handbook</a> &ndash; Contents
<ul>
<li><a href="../look4.htm">Prospecting guide</a></li>
<li><a href="../survey/index.htm">Surveying guide</a></li>
<li><a href="../rescue.htm">Rescue guide</a></li>
<li><a href="../photo.htm">Photography guide</a></li>
<li><a href="index.htm">Rigging guide</a> &ndash; Contents
<ul>
<li>Introduction</li>
<li><a href="boltin.htm">Bolt belays</a> - placing and using</li>
</ul></li>
</ul></li>
<li><a href="../../infodx.htm">Index to info/topics pages</a></li>
<li><a href="../../indxal.htm">Full Index to area 1623</a>
<ul>
<li><a href="../../areas.htm">Area/subarea descriptions</a></li>
</ul></li>
<li><a href="../../index.htm">Back to Expedition Intro page</a></li>
<li><a href="../../../index.htm">Back to CUCC Home page</a></li>
</ul>
2001-08-15 19:29:27 +01:00
</body>
</html>