<non_public>False</non_public><!-- 'False' or 'True'. True if the cave should only be visible to logged-in users. Caves are normally public, so enter 'False' unless you know otherwise. -->
<caveslug>1623-2023-mg-03</caveslug><!--(Required). Internal I.D. used to refer to this cave in entrance data files. Typically the same as the filebase, e.g. '1623-195' -->
<official_name>Kalte Salamanderhöhle</official_name><!-- Name of the cave (normally in German) Use ü for u+Umlaut and ö for o+umlaut eg Höhle for Hohle and Glück for Gluck-->
code used in the Austrian kataster e.g '1/S +' - https://expo/.survex.com/katast.htm
T Trockenhöhlen (Dry caves)
W Wasserhöhlen (Caves with water)
(W) Zeitweilig aktiv Wasserhöhlen (Caves with seasonal water)
E Eishohlen (Caves with ice formations)
S Schachthöhlen (Caves with pitches)
H Halbhöhlen (Rock shelters ?)
- unerforscht (unexplored)
= befahren (visited)
× teilweise vermessen (partly surveyed)
+ erforscht (exploration considered complete)
-->
<kataster_number></kataster_number><!-- (Either this or unofficial_number is required). Official number in Austrian kataster if one has been allocated -->
<unofficial_number>2023-mg-03</unofficial_number><!-- (Either this or kataster_number is required). Initial temporary cave ID used until kataster number is allocated e.g. '2012-DD-01'-->
<entranceslug>1623-2023-mg-03a</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
<letter>a</letter><!--Leave blank for single-entrance cave. If there is more than one entrace then the letter needs to be given. Generally matches the entranceslug ID. -->
<entranceslug>1623-2023-mg-03b</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
<letter>b</letter><!--Leave blank for single-entrance cave. If there is more than one entrace then the letter needs to be given. Generally matches the entranceslug ID. -->
<entranceslug>1623-2023-mg-03c</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
<letter>c</letter><!--Leave blank for single-entrance cave. If there is more than one entrace then the letter needs to be given. Generally matches the entranceslug ID. -->
<entranceslug>1623-2023-mg-03d</entranceslug><!-- Internal ID to refer to each entrance instance in the entrance files (typically the same as that filename (e.g. 1623-161c). Matches the 'slug' field in the entrance file -->
<letter>d</letter><!--Leave blank for single-entrance cave. If there is more than one entrace then the letter needs to be given. Generally matches the entranceslug ID. -->
<explorers>Martin Green, Janis Huns, Zac Woodford</explorers><!-- 'CUCC Expo' and year(s) of exploration. To distinguish from caves explored by foreign groups. Individual names can be given too if it was a small cave. -->
<survex_file>caves-1623/2023-mg-03/2023-mg-03.svx</survex_file><!-- Name of top-level survey file for this cave. Relative to the 'loser' survex repository. So for most caves that's "caves-162x/cavenum/cavnum.svx". (e.g. caves-1623/204/204.svx -->
<underground_description><p>Cold Salamander Cave is formed along an obvious surfacee weakness going from SW to NE. In 2023 the most south westely entrance (A), could be down climbed for 2m to a snow pile. This was descended with the aid of a handline into a significant chamber. A few metres to the North East another shaft (B) also entered but with a pitch down to the snow slope. The chamber is deorated with several 4m long icicles and a stationary Salamander.</p>
<p> The passage leads to more snow piles, produced from the two north easterly entance pitches (C and D). Carrying on a phreatic tube QM1 can be seen descending and becoming blocked with snow.</p></underground_description><!-- Underground description. (description of approach and entrance goes in entrance file). For a small cave this will be the entire description. For larger caves it will be the front page of the description, or a short intro, containing links to other pages with the cave description in, or even nothing but a link. -->
<equipment></equipment><!-- For a small cave, summary of gear needed to descend. For longer caves it could be blank, a table, or just refer to the description/topos. Leave blank if this info is in the description. -->
<references></references><!-- References to documentation. Could be Journal articles or Logbook entries. Can be links if the docs are online. -->
<survey></survey><!-- Drawn-up surveys. Scans of paper surveys or images/PDFs of electronic surveys. Should include HTML to display current plan and elevation, with links to larger versions (See section on URLs and files). Could list links to multiple years of survey, or even a separate survey page if it's complicated enough. -->
<underground_centre_line></underground_centre_line><!-- 'In dataset' if it is in the survex dataset. Blank if not, or notes about status such as 'surveyed, but no entrance fix so not yet in dataset'. -->
<notes></notes><!-- Normally empty, but place for anything else that should be noted, such as info on cave maybe being a duplicate, or lost -->
<length></length><!-- Cave length. Can be left blank and system should fill it in automatically from survey data (it doesn't yet) -->
<depth></depth><!--Cave depth. Can be left blank and system should fill it in automatically from survey data (it doesn't yet) -->
<extent></extent>
<description_file></description_file><!-- Path of top-level description file for this cave, when a separate file is used. Otherwise blank. -->
